User`s guide

CONFIGURING THE CARD
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
54
t
Environment Status
The Environment Status page displays the status of the optional EMP (see Figure 39).
Figure 39. Environment Status Page
Temperature and humidity measurements are displayed in a graduated bar
(see Figure 40).
Current Reading
Low Threshold
High Threshold
Figure 40. Graduated Bar (Humidity Bar Shown)
Status parameters:
S Cursor: Indicates the current reading.
S Red zones: The red zones to the left and right represent the low and high thresholds
that can be set on the Environment Settings page.
If notification is turned on, an alarm is generated when the measured value enters
one of these zones.
S Reset Min/Max: For temperature or humidity, displays the time-stamped minimum
and maximum since the previous reset.