User`s guide

CONFIGURING THE CARD
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
53
t
Environmental Monitoring Probe
The Environmental Monitoring Probe (EMP) is an optional accessory that measures
temperature and humidity through two external contacts. The EMP is connected with
a standard network cable to the ConnectUPS-MS Card Sensors port. The card
automatically detects the EMP presence. The ConnectUPS-MS Card Web page
displays an Environment section on the menu bar with the following items:
S Status
S Settings
S Log
EMP characteristics:
S Temperature measurement from 0 to 70°C with ± 1°C accuracy
S Humidity measurement from 0 to 100% with ± 6% accuracy
S Time-stamped minimum and maximum readings for temperature and humidity
S Choice of temperature readings in Celsius or Fahrenheit
S High and low thresholds, hysteresis, and offset that are adjustable through the
Web interface
S Option of including notification of status changes by e-mail, SMS, or SNMP trap
S Position detection of two dry contacts (maximum sensor/contact distance: 20m)
S Name and status of each configurable contact
S Recording of events and measurements in the card log
S Possibility of shutting down the installation safely if one of the thresholds is
exceeded or dry contact status changes
S Connection to the ConnectUPS-MS Card by Category 5 straight RJ-45 network
cables (maximum card/EMP distance: 20m)