User`s guide

CONFIGURING THE CARD
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
48
t
Access Control
Select Access Control from the menu bar to configure the parameters to allow secure
access to the card using a browser or SNMP (see Figure 36).
NOTE If you are not already logged on, you will be prompted to enter your user name and password before
accessing this page.
NOTE Restart the card to activate any Access Control configuration changes.
Figure 36. Access Control Page
Configurable access control settings are:
S Enter New Manager Login: The login user name. This text field (limited to ten
characters) enables secure access and modification of pages. Default value is
admin.
S Enter New Password: This text field (limited to ten characters) enables secure
access to Configuration menu pages. Default value is admin.
S Confirm New Password: Re-enter the new password.
S Security mode: Manages the various authentication methods for page access:
- Authentication for configuration: Only the configuration pages are protected by
user name and password.
- Full authentication: All pages are protected by a user name and password.
- SSL and full authentication: All pages are protected by user name and password
and are accessible only in SSL.
When SSL and full authentication is selected, access to the Web interface is made in
secure mode (https). Connections with Network Shutdown Modules stay in standard
mode (secure TCP).