User`s guide

CONFIGURING THE CARD
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
47
t
Central Shutdown Configuration
Use the Central Shutdown Configuration page to define the shutdown and notification
settings used by the Network Shutdown Modules that connect to the
ConnectUPS-MS Card.
NOTE This feature is not supported by NetWatch.
To view and modify Central Shutdown Configuration parameters:
1. Select Notified Applications from the menu bar. The Notified Applications page
opens.
2. Select the Configuration column head in the Notified Applications table to open
the Central Shutdown Configuration page (see Figure 35).
Figure 35. Central Shutdown Configuration Page
3. Change parameters as needed:
- Shutdown after: Optional. The time period from the time of the power failure until
the launch of the UPS shutdown sequence.
- Shutdown duration: The shutdown duration necessary to properly shut down the
computer.
- Broadcast: Network notifications to the Administrators and Users groups on
events.
4. Click Save and then OK to confirm changes.