User`s guide

Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
1
t
Chapter 1 Introduction
The Eaton ConnectUPSt–MS (Mini-Slot) Web/SNMP Card works with Eaton UPS
Management Software to monitor, manage, and protect uninterruptible power
supplies (UPSs) through standard Web pages, a Network Time Protocol (NTP) server,
and Secure Sockets Layer (SSL) security protocol. The ConnectUPS-MS Card can
support up to five connected browsers at a time, or three with SSL protocol.
You can configure the card with any one of the following options:
S Web browser
S Local serial link (network parameters)
S Bootstrap Protocol/Dynamic Host Configuration Protocol (BOOTP/DHCP, network
parameters)
In addition, the ConnectUPS-MS Card has the following features:
S Simultaneous access of up to five connected browsers (three in SSL)
S Configuration of automatic e-mail message in response to UPS alarms and to
transmit periodic reports
S Control of UPS on/off switching with a Web browser
S Adjustment and control of load segments through the Web interface, including
sequential starting of the installation and optimization of backup time by shutting
down non-priority systems
S Automatic shutdown of UPS-protected computers with NetWatch client software
S Measurement of humidity and temperature with the optional Environmental
Monitoring Probe (EMP)
S Automatic data and time adjustment through an NTP server
S Protection by encrypted password
S Protection by secure SSL connection
S Log storage in the non-volatile memory
S Languages available:
- English
- French
- German
- Italian
- Spanish
- Portuguese
- Chinese Simplified
- Japanese
- Korean
- Chinese Traditional
- Russian
S Online Help (English only)
S Card firmware updated through the network
S Fast Ethernet 10/100 MB compatibility with auto-negotiation on the RJ-45 port