User`s guide

CONFIGURING THE CARD
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
44
t
Notified Applications
Use the Notified Applications page to:
S Display network management system (NMS) applications set to receive
notifications from the card. All applications and their main parameters display.
S Add an NMS to notified applications.
S Test the operation of a notified application.
NOTE Network Shutdown Module and NetWatch (on protected server boot) are protection applications
that subscribe automatically to the Notified Applications list (see “Protection Applications” on page 75 for
more information).
Select Notified Applications from the menu bar to open the Notified Applications page
(see Figure 33).
Figure 33. Notified Applications Page
The Notified Applications page displays the following parameters:
S Check box: Enables users to select one or more applications. Select All to select or
clear all check boxes simultaneously.
S Nr: Provides the assigned application number.
S Hostname or Address IP: By priority, the host name of the computer is displayed
when the IP address can be converted into a host name by a Domain Name
System (DNS) server, or if the application has been entered as a host name.
S Application Name: Provides the user-assigned name.
S Output: Provides the name of the UPS output from which the client is powered.