User`s guide

CONFIGURING THE CARD

Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality

S History log interval (sec): Enables users to specify a measurement save period.

Values are from 5 to 99999 seconds, 60 seconds by default.

S Environment log interval (sec): Enables users to specify the temperature and humidity

measurement save period. Values are from 60 to 99999 seconds, 300 seconds by

default.

S Save: Saves any modifications.

S Reset Communication: Enables users to perform a remote reboot of the card without

modifying the configuration. Specifying this action is required for any changes you

made on the Network Settings page. To ensure security, this operation requires

admin user name and password.

S Factory Reset: Enables users to restore the default configuration of all the card's

parameters.

If the Keep TCP/IP parameters checkbox is selected, the IP address, subnet mask,

gateway, and BOOTP/DHCP retain their values.

To ensure security, this operation requires admin user name and password. By

default, user name and password are both admin.