User`s guide

CONFIGURING THE CARD
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
42
t
S SMTP Server (for Email Notification): Indicates the name or IP address of the local
server with which the card connects to send e-mail messages. You can fill in the
field either as host + domain name (DNS resolution) or directly with the IP address.
The default value is smtpserver. The card uses the standard port (25) for sending
e-mail messages.
S SMTP server authentication: Optional. To select this option, select the checkbox and
enter the SMTP server user name and password.
For security purposes, you must click Save and enter the admin user name and
password to save modifications or run commands. The default user name and
password are both admin.
Reboot the card after any changes to these parameters (see the following section,
“System Settings”).
System Settings
Select System from the menu bar to customize the information that displays on the
UPS Properties page (see “UPS Properties Page” on page 18). The System Settings
page opens (see Figure 32).
Figure 32. System Settings Page
Configurable system settings are:
S UPS Contact: Enables users to enter the name of the person responsible for UPS
administration at IT network level and/or electrical maintenance. This text field is
limited to 49 characters. This field does not appear on any other Web page. By
default, the value is Computer Room Manager.
S UPS Location: Enables users to enter a description (limited to 31 characters) of the
physical location of the UPS in your installation (for example, Computer Room
E1-C066). This text displays on the home page. By default, its value is Computer
Room.
S Default Language: Enables initialization of the browser language at card connection.
Select one of the available languages (English, French, German, Italian, Spanish,
Portuguese, Chinese Simplified, Japanese, Korean, Chinese Traditional, or
Russian). To change the language of the Web interface pages, restart your browser
after modification.