User`s guide

CONFIGURING THE CARD
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
38
t
E-Mail Message Settings
Use the Email Message Settings page to customize the content of e-mail messages
initiated by the card (see “E-mail Notification” on page 36). See Figure 29.
Figure 29. Email Message Settings Page
Common settings for all e-mail message recipients follow:
S Sender (59 characters maximum): Identifies the source of the message. The default
value is [e-mail].
This field allows free text. However, depending on the SMTP server configuration,
the server may check that the domain name contained in the Sender address
exists and that the user in the Sender address belongs to this domain.
S Subject: Identifies the subject of the e-mail message to be sent. Enter text and
select from the following optional check boxes to build the message subject:
- UPS Name specifies the name of the UPS.
- UPS Location displays the geographic location of the UPS (see “System
Settings” on page 42).
- Event Message identifies the event generating the e-mail message.