User`s guide

CONFIGURING THE CARD
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
33
t
Measurements
Select Measurements from the menu bar to view the measurements for a single-phase
UPS (see Figure 25).
Figure 25. Measurements Page
The following measurements are saved and time-stamped:
S AC Normal Voltage: Value of the utility voltage supplying the UPS
S AC Normal Frequency: Value of the utility frequency supplying the UPS
S AC Output Voltage: Value of the UPS output voltage
S AC Output Frequency: Value of the UPS output frequency
S AC Output Power (kVA): Value of the UPS output power
S AC Output Load level (%): Value of the percentage of load at UPS output
S Battery Capacity (%): Percentage of charge available in the battery
S Battery Remaining time (min): Estimate of the remaining backup time
The save frequency of these values (60 seconds by default) is defined on the System
page (see “System Settings” on page 42). Approximately 435 time-stamps can be
stored on the card. When the system exceeds this threshold, the oldest time-stamps
are deleted automatically.
Save Log enables you to open or save all saved values in comma separated values
(CSV) format (compatible with Microsoft Excel type spreadsheets).
Clear Log enables you to delete all records. Enter the user name and password to
validate this action.