User`s guide

CONFIGURING THE CARD

Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality

Table 10. System Alarms

ConnectUPS-MS Web/SNMP Card startup

Send test mail SUCCESS

Send test mail ERROR

Send mail to <recipient> ERROR

<Sensor name> Communication failure

<Sensor name> Communication restored

Firmware upgraded

Connected NSM list Full, last connection refused

sendTrap() -> Unable to resolve hostname <hostname>

SNMP Send Trap # <num> failure to <hostname>

Time changed by user with yyyy/mm/dd hh:mm:ss

Time synchronized by NSM or EPM with yyyy/mm/dd hh:mm:ss

View UPS and Card Information

Select About Your UPS from the UPS Status list to display information about the UPS

and the card (see Figure 21).

Figure 21. About Your UPS Display