User`s guide

CONFIGURING THE CARD
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
16
t
Logging In
By default, the user name and password are both admin (see Figure 15).
Figure 15. Login Window
Both the user name and password fields accept a maximum of ten characters. After
five minutes have elapsed without activity on the Web page, or if the browser is
closed and reopened, you must re-enter the user name and password.
An error in either field results in rejection of the requested action (such as save, page
access, or card reboot). After three unsuccessful login attempts, you must restart the
browser. Both the user name and password fields are encrypted with an MD5 type
algorithm, ensuring total security.
See “Option 3: Set Login Password to Default” on page 71 to reset the password.
Optimizing Browser Performance
To view status changes on the UPS in real time, configure the browser so that it
automatically refreshes all the objects on the current page.
For example, if you are using Internet Explorer:
1. Go to Tools > Internet Options > General > Temporary Internet files > Settings.
2. Select Every visit to the page.
3. Click OK to close the Settings window, and then click OK again to close the
Internet Options window.