User`s guide

Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality

Chapter 3 Configuring the Card

NOTE You must be logged in as admin to configure the card.

This chapter explains:

S Navigating the card's Web page

S Understanding UPS properties

S UPS power management

S Understanding UPS measurements, Event log, and System log

S Configuring e-mail notification

S Configuring Simple Network Management Protocol (SNMP) options and managing

from an SNMP network management system (NMS)

S Setting up access control

S Setting the date and time

S Setting environmental thresholds

Navigating the Card's Web Page

Figure 14 shows the different areas and features of the card’s Web page. The UPS

Properties page is the home page that displays after you log on to the Web interface.

Menu Bar

Link to Help

Figure 14. Navigating the Card's Web Page

The menu bar to the left of the page contains links to the card's additional pages for

status information and configuration options.