Manualshelf

User`s guide

ManualsBrandsEaton ManualsComputer equipmentNetwork Management Card
11121314151617181920
GETTING STARTED
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
12
t
2. Type 1 and press Enter. The card displays the settings supplied by the server (see
Figure 11).
-------------------------------------------------------------
Network configuration
-------------------------------------------------------------
MAC address : 00:20:85:FD:1C:07
Mode : Static IP
IP address : 166.99.21.94
Link Local IPv6 address : FE80::220:85FF:FEFD:4210/64
Global IPv6 address :
2001:720:410:100A:220:85FF:FSFD:4210/64
Global IPv6 address :
1789:720:410:100A:220:85FF:FSFD:4210/64
Subnet mask : 255.255.248.0
Gateway : 166.99.17.1
-------------------------------------------------------------
Figure 11. Network Configuration Menu
3. Record the IP address. The IPv6 parameters are read only.
4. To exit, type 0 and press Enter; then type 0 and press Enter again. The card is now
operational.
NOTE As long as the card is not connected to the network, it continuously attempts to make connection.
Once the connection has been established, the operational mode presended in the table becomes effective.