User`s guide

GETTING STARTED

Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality

6. Enter admin. The main menu displays (see Figure 9).

-------------------------------------------------------------

Eaton Network Management Card

-------------------------------------------------------------

1 : Reset

2 : Network configuration

3 : Set Login Password to Default

4 : Return to Default Configuration

0 : Exit

-------------------------------------------------------------

Figure 9. ConnectUPS-MS Card Main Menu

Configuring the Network With a DHCP Server

The card automatically collects the IP parameters from the server by default.

NOTE When the card is not connected to the network, it continuously attempts to connect. When the

connection is established, the LEDs indicate the status (see Table 1 on page 5).

To view the parameters:

1. From the main menu, type 2 and press Enter. The Network Settings menu

displays (see Figure 10).

-------------------------------------------------------------

Network settings

-------------------------------------------------------------

1 : Read Network settings

2 : Modify Network settings

3 : Set Ethernet speed

0 : Exit

-------------------------------------------------------------

Figure 10. Network Settings Menu