User`s guide

GETTING STARTED
Eaton ConnectUPS –MS Web/SNMP Card S 164201819 Rev 3 www.eaton.com/powerquality
8
t
Installing the Optional EMP
The Environmental Monitoring Probe (EMP) is available as an option.
The EMP allows remote monitoring of the UPS's environment through regular
measurements of temperature and humidity through two external contacts.
On UPSs with the EMP installed you can:
S Set temperature and humidity thresholds.
S Configure the system to send notification of environmental alarms through e-mail
messages and SNMP traps.
S Monitor current and historical environmental data.
The EMP is connected to the Settings/Sensor port directly on the ConnectUPS-MS
Card with a standard Ethernet cable (20 meters maximum). Recognition is automatic.
An Environment section is added to the main menu of the Web interface.
Ethernet Port Settings/Sensor Port
EMP
Ethernet
Figure 5. Installing the EMP