User manual
www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/EG Page 65/142
Connections with Intelligent Power Protector stay in standard mode (secure TCP)
SSL Security Implementation:
SSL version 3.0
TLS version 1.0
Method TLS_RSA_WITH_512_MD5
Certificate 1024 bits
Auth RSA
Key Exchange RSA
Encryption RC4_512
Digest MD5
Changes take effect after a card reboot
Telnet access: This parameter enables the access to the setting parameters interface via a Telnet/SSHI
connection.
Telnet security: This parameter defines the protocol for the access to the setting parameters interface.
These 2 values are mutually exclusive.
TELNET: The data are read or written via an unsecured access.
SSH: The data are read or written via a secured access.
Console interface: This parameter defines the way to access the setting parameters. The 2 values are
mutually exclusive. The selected HMI (Human Machine Interface?) is available for the TCP/IP
connection (RS232 not concerned) and for the 2 protocols (Telnet, SSH). The new value will be taken
into account after a manual reset of the NMC.
MENU: The HMI is a menu interface and the parameters are accessible via some pre-defined menus.
CLI: The access to the parameters is done independently of each other using the command line
interface.
Save: Saves any modifications.