User manual

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/EG Page 47/142
4.3 Notification
4.3.1 Email Notification
The card offers the possibility of redirecting UPS alarms to an e-mail server. The format of these e-mails is
compatible with mobile telephone transfer systems using text messages (SMS).
SMS notification requires the use of a third-party application that converts emails to SMS.
 Recipient List:
On the left side of this page, up to four recipients can be configured to receive e-mails from the card.
Each addressee has its own trigger events, selected from the right side of the page, for which an e-mail
is sent. The card’s log indicates e-mail transmission errors.
Each recipient is configured with the following parameters:
 Recipient: (Field is limited to 99 characters) this is the e-mail address of the person or
department to receive the e-mail.
The default value is : [e-mail]
 eNotify: This parameter enables communications to the Eaton eNotify Monitoring and
Diagnostics Service. NOTE: Available only for customers with a valid eNotify Service
Contract.
 Attached files: The files selected (Measurements, Event log, System log, Environment
measurements) are enclosed with each e-mail sent. The files are sent in CSV format
 Periodic report: In addition to the e-mails sent when events occur, a periodic e-mail
containing the 3 log files (or 4 when the optional Sensor is connected) can be sent to the