User manual

www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card – User Manual 34003991XT_EN/EG Page 2/142
Contents
1 EATON NETWORK SOLUTION 6
1.1 GENERAL PRESENTATION 6
1.1.1 Connecting the UPS to the Ethernet network 7
1.1.2 Protection of the computers/servers 7
1.1.3 Supervision of the UPSs over the network 8
1.1.4 Connection 8
1.2 PRESENTATION OF THE NETWORK MANAGEMENT CARD (NMC) 10
1.2.1 Compatibility with UPSs 10
1.2.2 Direct sending of E-mail 11
1.2.3 Sending text messages (SMS) 11
1.2.4 Compatibility with the Network Management Systems (NMS) – Trap sending 11
1.2.5 Environment Sensor (option) 11
1.3 TECHNICAL DATA 12
1.3.1 Hardware characteristics 12
1.3.2 EMC Compatibility 12
1.3.3 Configuration 12
1.3.4 Administration 13
1.3.5 Network 13
1.3.6 Environment sensor 14
1.3.7 MIB (Management Information Base) 14
1.3.8 Default parameters 15
2 INSTALLATION 17
2.1 UNPACKING AND CHECK ON CONTENTS 17
2.2 INDICATIONS 17
2.3 INSTALLATION IN THE UPS 18
2.4 SENSOR INSTALLATION (OPTION) 19
3 CONFIGURATION 20
3.1 CONFIGURE IP PARAMETERS 20
3.1.1 Your network is equipped with a DHCPv4 server 21
3.1.2 Your network is not equipped with a DHCPv4 server 22
3.1.3 IPv6 Parameters 22
3.2 TEST AFTER CONFIGURATION 22
4 SUPERVISION AND ADMINISTRATION BY BROWSER 23
4.1 OPTIMISING THE PERFORMANCE OF YOUR BROWSER 23
4.2 UPS 24
4.2.1 UPS properties page 24