Installation manual

34003905EN/AG
This manual provides all the information required to install and
configure the
Network Management Card .
For more information on the supervision, control and
configuration functions offered by the Network Management Card,
see the user manual available at download.mgeops.com or in the
Products/Power Management section at www.powerware.com.
The Environment sensor is a Network Management Card
option. It is available from EATON (cat. no 66846).
The sensor remotely monitors the UPS environment by regularly
measuring the temperature and humidity, and checking the states
of two external contacts. It can also send alarms (e-mail, SNMP
trap) tripped by pre-set thresholds.
Connection is made via the Service port (Settings/Sensor) on the
Network Management Card. The sensor is detected
automatically. Configuration and supervision use a menu that may
be accessed directly from the home page. For more information,
see the user manual of the Network Management Card.
When correctly installed and used in accordance with manufacturer
instructions, the card complies with the following standards:
z ITE (Information Technology Equipment) safety:
IEC/EN 60950-1 2002
z EMC: EN 61000-6-2 (2002), EN 61000-6-3 (2002), IEC/EN 62040-2
(2002). In compliance with European directives:
z Low voltage: 73/23/EEC and 93/68/EEC.
z EMC: 89/336/EEC and 93/68/EEC.
Federal Communication Commission (FCC) statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment.
The information presented in this manual is also available in other
languages at download.mgeops.com for EATON products,
www.powerware.com for Powerware products.
USER MANUAL
SENSOR CONNECTION (option)
TECHNICAL CHARACTERISTICS
Physical characteristics
Dimensions (W x D x H) 132 x 66 x 42 mm
Weight 70 g
RoHS 100% compatible
Storage
Storage temperature
range
-10°C to 70°C
Ambient conditions
Operating temperature
range
0°C to 40°C
Relative humidity 90% RH max. without condensation
Card performance
Supply voltage 5V ±5%
Supply current (all LEDs
ON and Environment
Sensor connected)
300 mA max.
Functions
Web supervision 5 browsers max. (http),
3 browsers max. (https)
Languages English, French, German, Italian, Spanish,
Chinese Simplified, Chinese Traditional,
Japanese, Russian, Korean
Alarms E-mail, SNMP TRAP, Web page
Log 400 measurements or events
Server protection Up to 100 servers protected
Network Fast ETHERNET, 10/100 Mbits, auto-
negotiation
HTTP 1.1, SNMP V1, NTP, TFTP, SMTP,
BOOTP/DHCP
Identification User name and password
Security SSL 3.0, TLS 1.0
Browsers Microsoft Internet Explorer 6.x or higher
NMS Intelligent Power Manager (IPM)
Management Pac 2
MIB MIB II - Standard IETF UPS MIB (RFC 1628) -
EATON Pulsar (ex MGE) MIB - EATON
Powerware (PowerMib)
Settings (default values)
IP network BOOTP/DHCP enabled
IP address: 192.168.1.2 (manual configuration)
Subnet mask: 255.255.0.0
Gateway: 0.0.0.0
NTP server: pool.ntp.org
Web-page access control User name: admin
Password: admin
Service-port menu access
control
Password: admin (not
modifiable)
Date and time Synchronise with an NTP server (GMT)
Service port 9600 bits/s, 8 bits, 1 bit stop, no parity
ELECTROMAGNETIC COMPATIBILITY
WEB SITE