User`s guide

MIB Objects

Eaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality 68

Traps

Traps are sent on status transition (when an alarm appears or disappears). Traps are composed of three levels

and can be filtered for severity:

Level 1: Warning

Level 2: Severe

Level 3: Critical

See Table 25 for a list of the main managed traps and Table 15 for a list of additional traps that are managed if

there is an optional EMP installed.

The trap access path is 1.3.6.1.4.1.705.1.11.

upsmgEnvironmentTemperature 0.1° C {8,7,1,3,1}

upsmgEnvironmentTemperatureLow 1 (yes), 2 (no) {8,7,1,4,1}

upsmgEnvironmentTemperatureHigh 1 (yes), 2 (no) {8,7,1,5,1}

upsmgEnvironmentHumidity 0.1% {8,7,1,6,1}

upsmgEnvironmentHumidityLow 1 (yes), 2 (no) {8,7,1,7,1}

upsmgEnvironmentHumidityHigh 1 (yes), 2 (no) {8,7,1,8,1}

upsmgEnvironmentInput1State closed (1), open (2) {8,7,1,9,1}

upsmgEnvironmentInput2State closed (1), open (2) {8,7,1,10,1}

Table 24. Pulsar MIB (MGE MIB) Objects (EMPs) (Continued)

MIB Object SNMP Format Add.path

NOTE See “Notified Applications” on page 40 to set the trap severity.

Table 25. MIB Traps

MIB Trap Trap Trap Severity Level

upsmgBatteryFault 1 3

upsmgBatteryOK 2 1

upsmgAtLowBattery 5 3

upsmgFromLowBattery 6 1

upsmgChargerFault 7 3

upsmgChargerOK 8 1

upsmgOnBattery 11 2

upsmgReturnFromBattery 12 1

upsmgOnByPass 13 2

upsmgReturnFromByPass 14 1

upsmgUtilityFailure 17 2

upsmgUtilityRestored 18 1

upsmgOverLoad 21 3

upsmgLoadOK 22 1

upsmgOverTemperature 23 3

upsmgTemperatureOK 24 1