User`s guide

MIB Objects

Eaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality 66

Eaton Pulsar MIB

This section contains an overview of MIB definitions for the following MIB files:

Eaton Pulsar MIB (MGE MIB)

Eaton Pulsar MIB (MGE MIB) for an Environmental Monitoring Probe (EMP)

The Network Card-MS implements the reduced Eaton Pulsar MIB (MGE MIB); only the objects listed in

Table 23 and Table 24are managed. The entire MIB description is available at www.eaton.com/powerquality.

Table 24 lists objects that are managed if there is an optional EMP installed. The Eaton Pulsar MIB trap access

path is 1.3.6.1.4.1.705.1.

xupsTopoMachineCode Integer {13.2.0}

xupsTopoUnitNumber Integer {13.3.0}

xupsTopoPowerStrategy Integer {13.4.0}

Table 23. Eaton Pulsar MIB (MGE MIB) Objects

MIB Object SNMP Format Add.path

upsmgIdentFamilyName String {1,1,0}

upsmgIdentModelName String {1,2,0}

upsmgIdentFirmwareVersion String {1,4,0}

upsmgIdentSerialNumber String {1,7,0}

upsmgConfigLowBatteryTime seconds {4,7,0}

upsmgConfigLowBatteryLevel % {4,8,0}

upsmgConfigAutoRestart 1 (yes), 2 (no) {4,9,0}

upsmgConfigVARating VA {4,12,0}

upsmgBatteryRemainingTime seconds {5,1,0}

upsmgBatteryLevel % {5,2,0}

upsmgBatteryVoltage deciVolts {5,5,0}

upsmgBatteryCurrent deciAmps {5,6,0}

upsmgBatteryFaultBattery 1 (yes), 2 (no) {5,9,0}

upsmgBatteryReplacement 1 (yes), 2 (no) {5,11,0}

upsmgBatteryLowBattery 1 (yes), 2 (no) {5,14,0}

upsmgBatteryChargerFault 1 (yes), 2 (no) {5,15,0}

upsmgBatteryLowCondition 1 (yes), 2 (no) {5,16,0}

upsmgInputPhaseNum — {6,1,0}

mginputVoltage_1 DeciVolts {6,2,1,2,1,0}

mginputVoltage_2 DeciVolts {6,2,1,2,2,0}

mginputVoltage_3 DeciVolts {6,2,1,2,3,0}

mginputFrequency_1 DeciHz {6,2,1,3,1,0}

mginputFrequency_2 DeciHz {6,2,1,3,2,0}

mginputFrequency_3 DeciHz {6,2,1,3,3,0}

mginputMinimumVoltage — {6,2,1,4,0}

mginputMaximumVoltage — {6,2,1,5,0}

Table 22. PowerMIB Objects (Continued)

MIB Object SNMP Format Add.path