User`s guide

Eaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality 63
Chapter 5 MIB Objects
This chapter describes the Management Information Base (MIB) files available with the card. A MIB is an
information repository residing on a device in a communication network. Network management software uses
a device’s MIB to manage the device. Every manageable device on a network has a MIB consisting of one or
more files that list information about the device.
Use the facilities provided by your Simple Network Management Protocol (SNMP) management software to
access the individual MIB objects. The objects define the information available about your UPS.
You can configure a device so that it generates a trap if a certain condition occurs, such as an alarm clearing.
The trap is sent to the management station to inform it of the occurrence.
UPS MIB
The Network Card-MS implements the full IETF standard UPS MIB (RFC 1628), including the IETF alarm table.
The IETF traps are implemented. Visit www.eaton.com/powerquality or http://tools.ietf.org for a description of
the MIB. The UPS MIB access path is 1.3.6.1.2.1.33.
Eaton MIB
The Network Card-MS implements the full Eaton MIB (PowerMIB), including alarm tables. The Eaton traps are
sent. The Eaton MIB access path is 1.3.6.1.4.1.534.
Table 22 is an abbreviated list of objects from the PowerMIB. The UPS output/load segment controls objects
and the entire MIB description is available at http://powerquality.eaton.com/Support/SoftwareDrivers.
Table 22. PowerMIB Objects
MIB Object SNMP Format Add.path
xupsIdentManufacturer String {1.1.0}
xupsIdentModel String {1.2.0}
xupsIdentSoftwareVersion String {1.3.0}
xupsIdentOemCode Integer {1.4.0}
xupsBatTimeRemaining Seconds {2.1.0}
xupsBatVoltage Volts DC {2.2.0}
xupsBatCurrent Amps DC {2.3.0}
xupsBatCapacity Percent {2.4.0}
xupsBatteryAbmStatus Integer {2.5.0}
xupsBatteryLastReplacedDate String {2.6.0}
xupsInputFrequency 0.1 Hertz {3.1.0}
xupsInputLineBads Integer {3.2.0}
xupsInputNumPhases Integer {3.3.0}
xupsInputTable — {3.4.0}
xupsInputPhase Integer {3.4.1.1.x}
xupsInputVoltage RMS Volts {3.4.1.2.x}
xupsInputCurrent RMS Amps {3.4.1.3.x}
xupsInputWatts Watts {3.4.1.4.x}
xupsInputSource Integer {3.5.0}
xupsDualInputStatus Integer {3.6.0}
xupsSecondaryInputWatch Integer {3.7.0}