User`s guide

Using the Telnet/SSH/CLI Interface
Eaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality 58
System Commands
Use system commands to customize the information about the UPS (see Table 17).
Table 17. System Commands
getSystem
Syntax getSystem [option1] [option2] . . .
Options Contact | Location | upsCustomName | Language
Example #> getSystem Location
setSystem
Syntax setSystem [option1] [option2] . . .
Options Contact = “xx..xx”
Location = “xx..xx”
upsCustomName = “xx..xx”
Language = AUTO | FRE | ENG | SPA | GER | ITA | CHI | JPN | KOR | CZI | RUS
Example #> setSystem Location=“my office“
getHistSyst
Syntax getHistSyst [option]
Options Interval
Example #> getHistSyst Interval
setHistSys
Syntax setHistSyst [option]
Options Interval = xx(10 to 2147483647 in seconds)
Example #> setHistSyst Interval=12