User`s guide

Configuring the Card
Eaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality 23
l
Battery load level: Remaining battery charge (in percent).
The battery load level is further described by this additional information:
- Charging: Indicates whether the utility power is present and the battery charge is in progress.
- Discharging: Indicates whether the UPS is operating on battery.
- Fault: Indicates whether the battery is faulty.
l
Remaining backup time: Estimates the battery’s maximum backup time remaining before UPS shutdown.
l
Battery status: Displays result of the last automatic battery test carried out by the UPS. Possible values are:
- OK: The test completed correctly.
- NOK: The battery needs to be checked.
- Deactivated: The automatic battery test was not validated on the UPS.
View Current Alarms
Select UPS Alarms from the UPS Status list to display the list of current alarms (see Figure 19).Table 8 lists the
alarm severity levels. Table 9 and Table 10 list the managed UPS and system alarms.
Figure 19. UPS Alarms Display
Table 7. UPS Output Status
Element Description
Green
Receptacle powered
Red
Receptacle not powered or not protected