User`s guide

Getting Started
Eaton Network Card-MS User’s Guide P-164000100—Rev 1 www.eaton.com/powerquality 10
6. Enter admin. The main menu displays (see Figure 8).
Figure 8. Network Card-MS Main Menu
Configuring the Network With a DHCP Server
The card automatically collects the IP parameters from the server by default.
To view the parameters:
1. From the main menu, type 2 and press Enter. The Network Settings menu displays (see Figure 9).
Figure 9. Network Settings Menu
NOTE When the card is not connected to the network, it continuously attempts to
connect. When the connection is established, the LEDs indicate the status (Table 1
on page 4).
-------------------------------------------------------------
Eaton Network Card-MS
-------------------------------------------------------------
1 : Reset
2 : Network configuration
3 : Set Login Password to Default
4 : Return to Default Configuration
0 : Exit
-------------------------------------------------------------
-------------------------------------------------------------
Network settings
-------------------------------------------------------------
1 : Read Network settings
2 : Modify Network settings
3 : Set Ethernet speed
0 : Exit
-------------------------------------------------------------