Datasheet
03/22/2012 HPL-ED2011 V2.0 EN (UX111) 4 / 5
Lamp load without R
v
per channel W 5 (Q1 - Q4)
Residual current on 0 signal per channel mA < 0.1
Max. output voltage
On 0 signal with external load < 10 MΩ V 2.5
On 1 signal with I
e
= 0.5 A V U = U
e
-1 V
Short-circuit protection Thermal (Q1 - Q4), (evaluation with diagnostics input I16)
Short-circuit tripping current for R
a
10 mΩ
A
0.7 I
e
2 per output
Total short-circuit current A 8
Peak short-circuit current A 16
Thermal cutout Yes
Max. operating frequency with constant resistive load R
L
< 100 kΩ
(depending on number of active channels and their load)
Ops./
h
40000
Parallel connection of outputs
With resistive load, inductive load with external suppressor circuit,
combination within a group
Group 1: Q1 to Q4
Number of outputs max. 4
Total max. current A 2 (Caution! Outputs must be switched simultaneously and for the same
period.)
Inductive load to EN 60947-5-1
Without external suppressor circuit
T
0.95 = 1 ms, R = 48 Ω, L = 16 mH
Utilization factor g 0.25
Duty factor %
DF
100
Max. switching frequency f = 0.5 Hz (max. DF = 50 %) Operations1500
DC-13, T
0.95 = 72 ms, R = 48 Ω, L = 1.15 H
Utilization factor g 0.25
Duty factor %
DF
100
Max. switching frequency f = 0.5 Hz (max. DF = 50 %) Operations1500
T
0.95 = 15 ms, R = 48 Ω, L = 0.24 H
Utilization factor g 0.25
Duty factor %
DF
100
Max. switching frequency f = 0.5 Hz (max. DF = 50 %) Operations1500
With external suppressor circuit
Utilization factor g 1
Duty factor %
DF
100
Max. switching frequency, max. duty factor OperationsDepending on the suppressor circuit
Analog�outputs
Potential isolation
From power supply No
From the digital inputs No
Point-to-point�connection
Potential isolation
From power supply Yes
Technical�data�according�to�ETIM�4.0
Output, voltage YES
Number of outputs 4
Input, resistance thermometer No
Number of inputs 6
Output, current No
Input, voltage No
Input, current No
Output signal configurable YES
Input, resistance No