Datasheet
DATASHEET - MCS4FORMCDN
Pressure switch, 1W, 65psi
Part no. MCS4FORMCDN
Catalog No. 024457
Eaton Catalog No. MCS4FORMCDN
Delivery program
Note on use This product complies with Low-Voltage Directive 2014/35/EC and EMC Directive
2014/30/EC and meets the requirements in EN 60947-5-1. This product does not
meet the rail industry's standard requirements. Accordingly, the user must review it
separately for the specific application at hand.
Product range Pressure switches for North America
Degree of Protection IP55
Number of poles 1 pole
for single-phase motors only
Max. pressure psi 65
Rated insulation voltage for UL/CSA V AC 300
Max motor rating HP = PS
115 V HP 0.25
200 V
208 V
HP 0.5
Rated operational current I
e
A 10
Notes
Rating data for approved types to UL/CSA
1)
Notes
In North America, pressure is stated in pounds/inch
2
(psi) (1bar=14.5 psi).
Heavy Pilot Duty = High switching capacity
Design verification as per IEC/EN 61439
Technical data for design verification
Operating ambient temperature min. °C -25
Operating ambient temperature max. °C 70
Technical data ETIM 7.0
Low-voltage industrial components (EG000017) / Pressure switch (EC000243)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Monitoring equipment (low-voltage switch technology) / Pressure monitoring equipment
(ecl@ss10.0.1-27-37-18-14 [AKF108014])
Suitable as guard Yes
Suitable as 2-point controller Yes
Suitable as limiter No
Max. operation pressure hPa 7000
Engaging pressure bar 0 - 4.2
Initial setting hPa 0 - 0
Switch off pressure bar 0 - 4.5
End setting hPa 0 - 0
Pressure-switching differential bar 0
Max. test pressure bar 32
Bursting pressure bar 90
Medium temperature °C 25 - 80
Connection Inner thread gas cylindrical (BSPP)
Thread size 1/2 inch
Rated voltage Ue at AC 50 Hz V 0 - 230
Rated voltage Ue at AC 60 Hz V 0 - 230
Rated voltage Ue at DC V 0 - 110
02/07/2019 Eaton 024457 ED2019 V52.0 EN 1 / 3