Datasheet

ManualsBrandsEaton ManualsSwitch Components & AccessoriesContact Element 2NO 22 mm Front Mounting

03/19/2012 HPL-ED2011 V2.0 EN (UX111) 1 / 4

Double�N/O�contact,�Cage�Clamp

Part�no. M22-CK20

Article�no. 107898

General trip indication '+', when tripped by voltage release, overload release, short-circuit release or by the residual-current release due to residual-current.

Program

Range   RMQ-Titan (drilling dimensions 22.5 mm)

Basic function   Accessories

Range   Accessories

Accessories   Standard auxiliary contact, trip-indicating auxiliary switch

Standard/Approval   UL/CSA, IEC

Construction size   NZM1/2/3/4

Single unit/Complete unit   Element

Connection technique   Cage Clamp

Fixing   Front fixing

Description   When using emergency switching off actuators M22-PV… max. 2

contact elements = 4 NC / N/O contacts

Auxiliary contacts: = safety function, by positive opening to IEC/EN

60947-5-1

  

N/O = Normally open   2 S

Contact sequence  

Contact travel diagram, stroke in connection with front element  

Protection type   IP20

Connection to SmartWire-DT   no

Connection type   Double contact

Description standard auxiliary contact HIN   Switching with the main contacts Used for indicating and interlocking

tasks.

Can be used with NZM1 circuit-breaker: a standard auxiliary contact

can be clipped into the circuit-breaker.

Can be used with NZM2 size circuit-breaker: a standard auxiliary

contact can be clipped into the circuit-breaker.

Can be used with NZM3, 4 circuit-breaker: up to three standard auxiliary

contacts can be clipped into the circuit-breaker.

Any combinations of the auxiliary contact types are possible.

Marking on switch: HIN.

On combination with remote operator NZM-XR... the right mounting

location of standard auxiliary contact HIN can be fitted only with

individual contacts.

For use with   NZM1(-4), 2(-4), 3(-4), 4(-4)

PN1(-4), 2(-4), 3(-4)

Summary of content (4 pages)

PAGE 1
Double�N/O�contact,�Cage�Clamp Part�no. M22-CK20 Article�no. 107898 General trip indication '+', when tripped by voltage release, overload release, short-circuit release or by the residual-current release due to residual-current. Program Range RMQ-Titan (drilling dimensions 22.
PAGE 2
N(S)1(-4), 2(-4), 3(-4), 4(-4) Approbationen UL approval CSA approval Product Standards UL File No. UL CCN CSA File No. CSA Class No. NA Certification Degree of Protection Yes Yes IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No.
PAGE 3
Different�rated�operational�currents when used as auxiliary contact for NZM circuit-breaker bei AC = 50/60 Hz Bemessungsbetriebsstrom AC-15115 Ie V 230 Ie V 400 Ie V 500 Ie V DC-1324 Ie V 42 Ie V 60 Ie V 110 Ie V 220 Ie V M22K... M22CK... XHIV A 4 4 4 A 4 4 4 A 2 - 2 A 1 - 1 A 3 3 3 A 1.7 1 1.5 A 1.2 0.8 0.8 A 0.8 0.5 0.5 A 0.3 0.2 0.2 Short-circuit protection max. fuse A gG/ gL 10 Max.
PAGE 4
Suitable for residual current device No Number of contacts as change-over contact 0 Number of contacts as N/O 2 Number of contacts as NC 0 Suitable for impulse relays No Suitable for position switches No Suitable for switch-disconnector/residual current device No Suitable for contactors No Suitable for installation contactor / installation relay No CAD-Data Product standards CAD data: http://eaton-moeller.partcommunity.