Technical data

June 2008
40-32
For more information visit: www.eaton.com CA08102001E
Adjustable Frequency Drives
40
SLX9000
Open Drives
LonWorks Network Communications
The LonWorks Network Card OPTC4 is
used for connecting the 9000X Drive
on a LonWorks network. This interface
uses Standard Network Variable Types
(SNVT) as data types. The channel
connection is achieved using a FTT-
10A Free Topology transceiver via a
single twisted transfer cable. The
communication speed with LonWorks
is 78 kBits/s.
CanOpen (Slave) Communications
The CanOpen (Slave) Network Card
OPTC6 is used for connecting the
9000X Drive to a host system. Accord-
ing to ISO11898 standard cables to be
chosen for CAN bus should have a
nominal impedance of 120Ω, and spe-
cific line delay of nominal 5 nS/m.
120Ω line termination resistors
required for installation.
DeviceNet Network Communications
The DeviceNet Network Card OPTC7
is used for connecting the 9000X Drive
on a DeviceNet Network. It includes a
5.08 mm pluggable connector. Trans-
fer method is via CAN using a 2-wire
twisted shielded cable with 2-wire bus
power cable and drain. The baud rates
used for communication include 125K
baud, 250K baud and 500K baud.
Options
Control Panel Options
Table 40-40. Control Panel Factory Options
Table 40-41. Miscellaneous Options
Consult factory.
Brake Chopper Options
The Brake Chopper Circuit option is
used for applications that require
dynamic braking. Dynamic Braking
resistors are not included with drive
purchase. Consult the factory for
dynamic braking resistors which are
supplied separately. Resistors are not
UL Listed.
Table 40-42. Conformal (Varnished) Coating
Adder — 380 – 500V,
(See Catalog Number Description to order.)
Table 40-43. Conformal Coated Board Kits
See Option Catalog Numbers on Page 40-31.
Construct Catalog Numbers for factory
installed per Table 40-36 on Page 40-29.
Replace “__” with the correct Catalog Number
from Page 40-31. Example: OPTC2V.
Description Factory Installed Field Installed
NEMA Type 1
Option
Code
Adder
U.S. $
Catalog
Number
Price
U.S. $
SLX9000 Series LCD Keypad — This option is standard on all drives and consists of an RS-232
connection, backlit alphanumeric LCD display with nine indicators for the RUN status and two
indicators for the control source. The seven pushbuttons on the panel are used for panel
programming and monitoring of all SLX9000 parameters. The panel is detachable and isolated
from the input line potential.
A KEYPAD-LCD
Keypad Remote Mounting Kit — This option is used to remote mount the SLX9000 keypad.
Includes 6.5 ft. cable, keypad holder and mounting hardware.
OPTDRA-02L
Description Catalog
Number
Price
U.S. $
External Dynamic Braking Resistors — Used with the Dynamic Braking Chopper Circuit to absorb motor regenerative energy
for stopping the load and to dissipate the energy flowing back into the drive. Resistors are separated into Standard Duty and
Heavy-Duty. Standard Duty is defined as 20% duty or less with 100% braking torque, while Heavy-Duty is defined as 50%
duty or less with 150% braking torque. Consult factory.
Frame Delivery
Code
Adder
U.S. $
MF4
MF5
MF6
FP
FP
FP
Field Installed Factory Installed
Catalog
Number
Price
U.S. $
Option
Designator
Adder
U.S. $
OPT_V

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . SS-2