Technical data

June 2008
CA08102001E For more information visit: www.eaton.com
40-169
Adjustable Frequency Drives
40
HVX9000
Open Drives
Catalog Number Selection
Table 40-256. Adjustable Frequency Drive Catalog Numbering System
All 230V Drives and 480V Drives up to 250 hp (I
L
) are only available with Input Option 1. 480V Freestanding Drives are available with Input Option 4
(EMC Level L). 2. 575V Drives up to 200 hp (I
L
) are only available with Input Option 4 (EMC Level L).
480V Drives up to 40 hp (I
L
) are only available with Brake Chopper Option B. 480V Drives 50 hp (I
L
) or larger are only available with Brake Chopper
Option N. 230V Drives up to 20 hp (I
L
) are only available with Brake Chopper Option B. 575V Drives are standard without Brake Chopper Option (N).
480V Drives 300 – 600 hp (I
L
) are available with enclosure style 0 (Chassis). 480V FR10 Freestanding Drives are available with enclosure style 1 (NEMA
Type 1) or 2 (NEMA Type 12). FR11 Freestanding Drives are only available with enclosure style 1 (NEMA Type 1).
Software Series
A = Standard Software
Keypad
A = Alphanumeric
Horsepower Rating (I
L
)
001 = 1
F15 = 1-1/2
002 = 2
003 = 3
005 = 5
007 = 7-1/2
010 = 10
015 = 15
020 = 20
025 = 25
030 = 30
040 = 40
050 = 50
060 = 60
075 = 75
100 = 100
125 = 125
150 = 150
200 = 200
250 = 250
300 = 300
400 = 400
H V X 0 1 0 A 1 –4A 1 B 1
Enclosure
0 = Chassis
1 = NEMA Type 1
2 = NEMA Type 12
Brake Chopper Options
N = No Brake Chopper Circuit
B = Internal Brake Chopper Circuit
Input Options
1 = 3-phase, EMC H
2 = 3-phase, EMC N
4 = 3-phase, EMC L
Voltage Rating
2 = 230 (208 – 240) V
4 = 480 (380 – 500) V
5 = 575 (525 – 690) V
Product Family
HVX = HVAC Drive Family
Options
Options appear in alphabetical order.
Extended I/O Card Options
B1 = 6 DI, 1 ext +24V DC/EXT +24V DC
B2 = 1 RO (NC/NO), 1 RO (NO), 1 Therm
B4 = 1 AI (mA isolated), 2 AO (mA isolated)
B5 = 1 ext +24V DC/ EXT +24V DC, 3 RO (NO)
B8 = 1 ext +24V DC/EXT +24V DC, 3 Pt100
B9 = 1 RO (NO), 5 DI 42 – 240V AC Input
Communication Cards
CA = Johnson Controls N2
CB = Siemens Apogee FLN
CJ = BACnet
C2 = Modbus
C4 = LonWorks
C8 = Modbus (D9 Type Connector)
D3 = RS-232 with D9 Connection
Board Modifications
1 = Standard Boards