Specifications

1. Figure B is typical of a Steel City LXM-WOW box or equal.
Figure B should be a 3.5” deep backbox for conduit
installations and is typical of a Steel City CY-1/2 box or equal.
2. Figure D is typical of a Steel City 52151 box or equal.
3. Figure E is typical of a Steel City 52171 box or equal.
4. Figure F is typical of two Steel City LXM-WOW boxes
or equal.
5. Figure G is typical of a Wiremold 5748-2 box or equal.
6. Figure Q is typical of a Steel City 52171 box with a Steel City
53151 extension ring or equal.
7. Figure W is typical of a Steel City 72171-1 box or equal.
8. Use 3.5” deep backbox on all MIZ products when EMT
conduit is used.
9. When used with AC Horn (J), “BB” must be used for surface
mount.
10. HS4, HS, MT or MTWP Strobe are for outdoor mounting.
11. Use with Series RSSP.
12. Figure U is typical of a RANDL Industries backbox.
(“Total Number of conductors shall be in accordance with
NEC table 314.16 (B)”).
(MM) OSB (NN) LSPKBB Backbox (Order Codes: Red 0756, White 0757)
Maximum Number of Conductors
AWG.
#18
AWG.
#16
AWG.
#14
AWG.
#12
4 4 4 4
Used with Exceder LSPK, LSPST
For indoor surface mounting of Exceder LED Speaker products
Used with ET1080
*
3.38
3.38
90°
*
*
90°
*
Mounting Strap
Mounting Tab
(4) Required
*Refer to specification sheet S7000 for mounting option details.
4.69”
Mounting Options
6.23”
2.08”
(OO) LSPKBB-C Backbox (Order Codes: Red 0927, White 1003)
Maximum Number of Conductors
AWG.
#18
AWG.
#16
AWG.
#14
AWG.
#12
4 4 4 4
Used with Exceder LED Ceiling LSTC, LHSC, LHNC,
LSPKC, LSPSTC
EATON Audible/Visual Appliances www.coopernotification.com
43