Datasheet

Technical Specification
Options
Battery* Eaton Extended Battery Module (EBM)
PW5130 48V EBM RM
P/N 103006587-6591
Weight: 29.5kg [65lb]
Dimensions (H,W,D*): 85mm (2U), 432mm (19”
mounting), 487mm
*Additional space is required at the rear for cables.
Typical run time values* (see graph).
Battery Run Time (minutes)
Equipment Power (watts))
• = Required number of battery modules.
*Battery times are approximate and vary depending
on factors such as:
- load configuration
- battery charge
- battery age and temperature.
* Other battery options available - consult your local
Eaton agent.
Battery Cables
or
CKBATT-02 Eaton EBM 5130 connection cable,
2000mm long.
CKBATT-01 ‘other batteries’ connection cable,
2000mm long.
Equipment
Cable
Customer equipment connection cable
CKLOAD-00 10-way connection loom, 1000mm long
EBM Rack
Mounting Kit
Included with EBM5130 as standard
Certifications
All products comply with international standards.
North America UL (Canada, USA), FCC Class B
Europe CE
Australia and New Zealand C-Tick
In the interests of continual product improvement all specifications are
subject to change without notice.
Input
AC Supply Nominal: 120V, 240V
Operating range: 90V – 275V
Power Factor † >0.99 (50 – 100% output current)
Efficiency † 91% (50 – 100% output current)
Output
DC Output
Voltage Range
43 – 57.5V
DC Output
Power
(maximum*) †
240V AC: 4.5kW
120V AC: 2.25kW
* Based on five rectifiers fitted, refer to EPR48-3G
rectifier data sheets.
Environmental
Operating
Temperature
Range
Rated: -10°C to +50°C [-14°F to +122°F]
Extended*: -40°C to +70°C [-40°F to +158°F]
*Output current is derated above 50°C [122°F]
Mechanical
Dimensions
H,W,D
3U, 19” mounting, 13.2” [335mm]*
* Additional clear depth space is required for
exhaust air.
System
System
Controller
SC200
DC Distribution
Module
12-way circuit breakers (2 x battery, 10 x load)
Circuit breaker type: magnetic/hydraulic, push fit
Battery circuit breakers: Heinemann AC1R Series
Typical ranges available: 30A, 40A, 50A, 60A, 70A
Load circuit breakers: Heinemann JC1S Series
Typical ranges available: 6A,10A, 15A, 20A, 25A,
30A
Communication
Features
USB direct
10BaseT Ethernet, TCP/IP, SNMP, Modbus-TCP,
Modbus-RTU and on board web server
RS232 to external PSTN or GSM modem (modem
not included)
Rectifier Blank
Panels
For unused rectifier positions
Software
DCTools Configuration software.
Free download from:
www.powerware.com/downloads
Power Xpert Remote control and monitoring software
† Power factor, efficiency and DC output power are dependant on
rectifier model fitted. Refer to the rectifier data sheet for further details.
Internet: www.eaton.com/dcpower
Email: [e-mail]
Eaton, CellSure, SiteSure, DCTools and
Power Xpert are trade names, trademarks,
and/or service marks of Eaton Corporation
or its subsidiaries and affiliates. All other
trademarks are property of their respective
owners.
© 2010 Eaton Corporation
All Rights Reserved
EPS5_F