User`s guide

Advanced Management
74 Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2
Figure 80. NMC Mass Configuration
Nodes Upgrade
Upload Device Firmware
NOTE Refer to the Network Management Card’s release notes to determine the latest
firmware release compatible with the hardware revision.
To upload a device firmware:
1. From the left-side Views panel
of the Eaton IPM main interface window, select the Management >
Nodes Upgrade menu item.
2. Select the cards on the Node List page (see Figure 81).
3. From the Node List button , select Set Login Parameters and enter the card login and password.
The access status changes from: A
ccess Denied ( ) to Access OK ( ).
4. From the Fir
mware > Import Firmware File… list box, the uploading window displays.
5. Click Br
owse to select the firmware from a disk accessible from the computer.
6. Click Im
port.
7. Click Fir
mware > Upload Firmware to nodes. The cards are updated with the selected firmware.
Figure 81. Management / Nodes Upgrade View 1