User`s guide

Advanced Management
Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2 73
Figure 79 provides a typical example with PDU Power Schedule configuration. The details of Power Schedule
1 to Power Schedule 8 are available from the device Web interface. Checking all Power Schedule “n” advanced
parameters synchronizes all the advanced parameters details of the category.
Figure 79. Advanced Parameters Not Displayed
Multiple Card Configurations Synchronization
The Eaton IPM can make changes to multiple Network Management Card configurations simultaneously.
To configure multiple Network Management Cards (administrator access):
1. From the left-side Views panel
of the Eaton IPM main interface window, select the Management >
Nodes Upgrade menu item.
2. Select the several cards on the Node List page (see Figure 80).
3. Select the No
de List button , select Set Login Parameters and enter the card login and password.
The access status changes from: A
ccess Denied ( ) to Access OK ( ).
After a few seconds, the Node configuration panel is updated.
4. From the combo box, select the configuration that will be the model, or click Edit .
The parameters that have different values on the cards are indicated by the
sign.
5. Select the check box associated with the parameters you want to synchronize.
6. Click S
ynchronize.