User`s guide

Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2 71
Chapter 6 Advanced Management
This chapter describes Eaton Intelligent Power Manager (IPM) advanced management features.
Nodes Settings
Single Node Configuration Display
The Eaton IPM can display the card and application configuration for other nodes on the network.
To display configurations for other nodes on the network (administrator access):
1. From the left-side Views panel
of the Eaton IPM main interface window, select the Management>
Nodes Settings menu item. The Node List page displays.
2. Select one node (card) from the Node List page (see Figure 77).
3. After a few seconds, on the right hand, the Node configuration panel is updated.
4. If you wish to save a standard node configuration (for
example to deploy to other similar nodes), use the
Configurations > Export Configuration file to export this configuration to a file.
Figure 77. Nodes Settings View
Single Card Settings
Eaton IPM can configure a remote Network Management Card.
To configure a remote Network Management Card (administrator access):
1. From the left-side Views panel
of the Eaton IPM main interface window, select the Management >
Nodes Settings.
2. Select one node (one card) from the Node List page (see Figure 77).