User`s guide

Supervision
Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2 63
CRITICAL A serious problem occurred on the UPS device. This problem requires an urgent action. Your
application might NOT BE powered.
Critical Event List (UPSs, ePDUs, Applications, Generic devices):
l
The UPS output is off
l
The outlet group 1 is off
l
The outlet group 2 is off
l
Battery fault
l
UPS overload
l
UPS fault
l
Low battery alarm
l
Applications must stop immediately...
l
System shutdown in progress...
l
Critical alarm (a generic Critical alarm is active on the device)
ePDU Critical Event List (Specific to ePDUs):
l
The input frequency is out of range
l
The input temperature is above high threshold
l
The input temperature is below low threshold
l
The input voltage is above high threshold
l
The input voltage is below low threshold
l
The input {x} is overload
l
The section {x} current is too high
l
The section {x} current is too low
l
The section {x} voltage is too high
l
The section {x} voltage is too low
l
The outlet group {x} current is too high
l
The outlet group {x} current is too low
l
The outlet group {x} is overload
l
The outlet group {x} is off
l
The phase {x} output is overload
l
The output frequency is out of range
l
The output is overload
l
The output voltage is above high threshold
l
The output voltage is below low threshold
COMMUNICATION LOST Communication is lost.
Communication Lost Event List:
l
Communication failure with Device or Application
DEVICE IS NOT MANAGED Device is not managed
l
Your device is not managed due to license limitation. Use the Settings > System selection to enter a Silver
or Gold license code.