User`s guide

Supervision
62 Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2
l
Communication restored with environment sensor
l
Humidity is in normal range
l
Temperature is in normal range
l
Input {x} on
l
Input {x} off
l
End of warning alarm
l
End of critical alarm
l
Redundancy restored
l
Protection restored
ePDU Normal Event List (Specific to ePDUs):
l
The input frequency is in normal range
l
The input temperature is in normal range
l
The input voltage is in normal range
l
The input {x} is in normal load
l
The section {x} current is in normal range
l
The section {x} voltage is in normal range
l
The outlet group {x} current is in normal range
l
The outlet group {x} is in normal load
l
The outlet group {x} is on
l
The phase {x} output load is in normal range
l
The output frequency is in normal range
l
The output load is in normal range
l
The output voltage is in normal range
WARNING A problem occurred on the UPS device. Your application is still protected.
Warning Event List (UPSs, ePDUs, Applications, Generic devices):
l
The system is powered by the UPS battery
l
Output on automatic bypass
l
Output on manual bypass
l
Humidity is below low threshold
l
Humidity is above high threshold
l
Temperature is below low threshold
l
Temperature is above high threshold
l
Warning Alarm (a generic Warning alarm is active on the device)
l
The device is under its load alarm threshold
l
The device is over its load alarm threshold
l
Protection lost
l
Redundancy lost
l
Shutdown in <time>
l
Remote Communication Error (remote communication or configuration issue is detected)