User`s guide

Configuration
Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2 31
Figure 23. Select Add a Connector
Figure 24. Add a Connector Dialog for Cisco UCS Manager
3. From the Add a Connector dialog, select Cisco UCS Manager from the Product drop-down list (see
Figure 24).
4. Add identification information for the selected connector:
l
Product: Cisco UCS Manageris already selected in the drop-down list.
l
Hostname or IP address: Type Cisco UCS Manager IP address
l
Port: Port number
l
Username: Type Cisco UCS Manager Administrator Username for the Administrator with admin rights
on the Cisco UCS Manager
l
Password: Type Cisco UCS Manager Administrator Password
5. Click Sa
ve after the fields are updated.
6. When the component is connected, the Cisco UCS Manager displays on the Infrastructure Connectors
page
(see Figure 25).
7. If the component does not display, refresh the page. Also, check the log to ensure the Event details
disp
lay with an OK connection state (see Figure 26).