User`s guide

Configuration
30 Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2
Automatic Data Purge
All IPM data (logs, measures and events) are stored in a database. This database automatically purges the
accumulated data when necessary according the purge parameter settings for the following parameters:
l
<maxTime>: Maximum timestamp for the oldest records (in ms)
l
<maxCount>: Maximum number of records, where the oldest records are removed first
These parameters can be modified in the “config.js” file in the logManager/purge section.
The default settings for purge include:
l
Data of type alarm (see events section) maxTime: 28 days maxCount: 50000
l
Data of type measure (see measures section) maxTime: 7 days maxCount: 200000
l
Data of type statistic (see stats section) maxTime: 28 days maxCount: 20000
l
Log system (see system section) maxTime: 28 days maxCount: 50000
Manage the Cisco UCS Manager Component
Enabling the Component
To enable the Infrastructure Connectors:
1. From the left-side Views panel of the Eaton IPM main interface window, select the Settings > System
menu item. The System page displays.
2. Click Ed
it modules settings in the right panel. The Edit modules settings dialog box displays (see
Figure 22).
3. Ensure that the Infrastructure Connectors checkbox is selected (checked).
4. Click Save.
Figure 22. Edit Modules Settings - Infrastructure Connectors
Add the Component
To add a Cisco UCS Manager:
1. From the left-side Views panel
of the Eaton IPM main interface window, select the Settings >
Infrastructure Connectors menu item. The Infrastructure Connectors page displays (see Figure 23).
2. Click A
dd a connector in the right panel. The Add a connector dialog box displays (see Figure 24).