User`s guide

Configuration

22 Eaton Intelligent Power Manager (IPM) User’s Guide v1.40

P-164000289—Rev 2

Figure 13. Change Driver Mode Dialog Box

Configure Node Settings

To configure node information and access parameters (administrators only):

1. From the left-side Views panel of the Eaton IPM main interface window, select the Settings > Auto

Discovery menu item.The Nodes List page displays.

2. Select a node from the Nodes List page.

3. Click the Edit node information button or click the Set node access parameters button in the right

panel.

4. The Edit Node Information dialog or the Access parameters dialog displays (see Figure 14 and Figure 15):

Edit node information dialog. The Edit node information dialog box allows editing the node name, the

user type, the node description and the associated load alarm threshold.

Access parameters dialog. You can define the access settings for all selected devices. Only relevant

settings are set, depending on the capabilities of the selected device capabilities.