User`s guide

Configuration
18 Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2
Quick Scan
The Quick Scan request is a broadcast frame on 4679 IANA reserved port and 69 standard TFTP port. Using
the Quick Scan operation, you will discover any of the following within a few seconds:
- Network Management Cards Network-MS (example, 66102 / 103006826) and Modbus-MS (example,
661
03)
- PXGX2000, PXGX-UPS, ConnectUPS BD, ConnectUPS X, or ConnectUPS MS
- ePDUs
- Eaton Intelligent Power Protector (IPP) or Network Shutdown Module V3
Range Scan
Using the Range Scan operation, you will discover the nodes that are outside of the Network segment and
nodes that are not compatible with the Quick scan feature. See “Compatibility” on page 2 to determine if your
node supports Quick scan feature.
In the Range scan dialog bo
x, you can edit IP address ranges. You can also check (select) the Override global
authentication settings checkbox to specify authentication parameters that are different from global scan
settings (see Figure 9).
Figure 9. Range Scan Dialog Box