User`s guide

Installation

Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2 13

Figure 6. Shutdown Displays in the Settings Menu Hierarchy

3. From the Settings > Shutdown page, assign the following:

IP address of the UPS that powers the local computer (power source)

Shutdown configuration parameters (timer, duration, type of shutdown, and (if needed) shutdown script

Select or deselect (check or uncheck) the checkbox for standard shutdown sequence

License Code

The Eaton IPM monitors up to 10 devices (including UPS Web Card, ePDU, or Eaton IPP Shutdown Controller)

without a license key.

If there are more devices to be monitored, an appropriate licen

se is needed. The license can also be upgraded

later without reinstallation.

Only for “Silver” or “Gold” paid versions:

1. I n Set

tings > System > Edit System Information, enter the license product key that is printed on the

commercial CD booklet (inside the CD case):

ref 66925 Eaton IPM Silver License (11 to 100 device nodes)

ref 66926 Eaton IPM Gold License (101 to unlimited devices nodes)

NOTE Nodes that are not managed due to license limitation appear with this icon:

Operation

1. Use the Views > Node List menu item to supervise the current state of the compatible power devices

and applications.

2. Select a line in the list and the panels are updated with selected device information (see Figure 7).