User`s guide

Introduction
Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2 5
Test conditions during 40 hours:
l
1300 nodes (including ~50 real), mainly Eaton IPMs, and Network Management Cards.
l
Average CPU load: 20~30%
l
Memory load: 200~300MB
Test with Machine 2 (typical PC)
l
CPU: Intel Core™ 2 Duo 6600 @2.4GHz
l
Memory: 2Go DDR2
l
HDD: 1 HDD 220 GB 7200 rpm
l
OS: Microsoft
®
Windows Vista
®
Enterprise 32 bits
Test conditions during 40 hours:
l
1000 nodes (including ~50 real), mainly Eaton IPMs, and some NSM and Network Management Card.
l
Average CPU load: ~ 60%
l
Memory load: 200 ~300MB
NOTE These tests have been performed on Windows Server Operating System. The
Windows 2003 or 2008 Operating Systems do not have the limitation of 10
simultaneous connections.
Network Ports
Table 4 lists the network ports used by the Eaton IPM.
Table 4. Network Ports
Protocol Mode Port
Eaton Network
Management
Card
Other Eaton UPS
Management Cards
*NOTE
Eaton IPP with
Shutdown Controller
Eaton IPP and Eaton
IPM
SMTP TCP/25 OUT OUT OUT OUT
DHCP/BOOTP UDP/67 OUT OUT X X
TFTP UDP/69 IN X OUT OUT
HTTP TCP/80 IN IN IN/OUT IN/OUT
NTP UDP/123 OUT OUT X X
SNMP UDP/161 IN IN OUT OUT
SNMP Traps UDP/162 OUT OUT X X
UNMP UDP/200 X OUT IN/OUT IN/OUT
HTTPS TCP/443 IN IN IN/OUT IN/OUT
Eaton Supervision TCP/4679 X X IN/OUT IN/OUT
Eaton Notification Broadcast UDP/4679 IN/OUT X IN/OUT IN/OUT
Eaton SSL Supervision TCP/4680 X X IN/OUT IN/OUT
Eaton Alarms Broadcast UDP/4680 OUT X IN IN
Eaton Connected Alarms TCP/5000 IN X OUT OUT
Eaton Connected Alarms TCP/5001 X X IN OUT
IPP-Unix (NUT) TCP/3493 X X IN/OUT IN/OUT
NOTE PXG
X2000, PXGX-UPS, Connect UPS BD, Connect UPS X-Slot, Network-MS