User`s guide

Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2 121
Chapter 10 Storage
The Eaton Intelligent Power Manager (IPM) can supervise storage devices. On the user interface, storage
devices are seen as a “Storage Appliance” type with following information displayed:
l
Typ e
l
Status
l
Name
l
Description
l
Class
l
Location
l
Contact
l
Link
Using the User Drivers feature, you can launch a Range
scan with the IP address of your storage equipment
(see “Range Scan” on page 18 and “User Driver Editor Dialog” on page 111 ). After performing a Range scan,
you will have a list of storage managed by Eaton IPM.
Enabling the Infrastructure Connectors Module
To enable the Infrastructures Connectors module for virtualization (administrator access):
1. From the left-side Views panel of the Eaton IPM main interface window, select the Settings > System
menu item. The System page displays (see Figure 133).
2. Click Ed
it modules settings in the right panel. The Edit modules settings dialog box displays (see
Figure 132).
3. Ensure that the Infrastructure Connectors checkbox is selected (checked).
4. Click Save.
Figure 132. Enable Infrastructure Connectors Setting for Virtualization