User`s guide
User Drivers
116 Eaton Intelligent Power Manager (IPM) User’s Guide v1.40
P-164000289—Rev 2
You can also define your own object list to create links for a specific device type in the User defined object editor
dialog. A new object can be defined by providing these properties:
l
Object name: Unique object user name
l
Object index option ([x]): Activate this option if the object needs to be indexed (e.g. value of type array).
l
Object type: Information, Alarm or Measure
l
Object unit: Optional unit which is displaying for the object
l
Object group: Name of the group whose object is attached. This group is shown in the Other data panel.
Objects with the same group name are represented in the same group.
Figure 130 illustrates the User defined object editor dialog.
Figure 130. User Defined Object Editor
!
IMPORTANT
l
The user-defined objects only display in a specific Node view panel named Other data (see
Figure 131). These user-defined objects display as a raw list that is sorted by groups.
l
The standard objects are NOT displayed in the Other data panel. These standard objects are
defined in standard IPM panels (see Table 16).
l
The user-defined object list is attached to the driver.
l
Click the Manage user defined objects… button in the rule editor to manage user-defined
objects.
Communication error PDU outlet [x] power
factor
Overload warning
Percent load (%)
Table 16. Standard Objects (Continued)
Information Status Input Output Battery Environment