User`s guide

User Drivers
Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2 115
There are two ways to select the destination object name:
l
Select a “well-known” and predefined object (which is a standard object managed by the IPM application)
from the standard objects list in Table 16.
l
Select a specific user-defined object when the needed object is not defined in the standard object list.
Tabl e 16 lists the standard objects used by the Eaton IPM.
Table 16. Standard Objects
Information Status Input Output Battery Environment
Name Shutdown imminent UPS input voltage
(V)
Active power (W) Battery charging Environment
communication lost
Description UPS internal failure UPS input current
(A)
Apparent power (VA) Battery discharging Environment humidity
alarm
Contact UPS overload UPS input
frequency (Hz)
UPS outlet #1 on Battery low Environment
temperature alarm
Location UPS master on UPS automatic
bypass voltage (V)
UPS outlet #2 on Battery fault Environment dry contact
[x]
Link Utility present UPS automatic
bypass current (A)
UPS outlet #1 active
power (W)
Battery capacity (%) Level environment dry
contact [x] opened
Serial number Redundancy lost UPS automatic
bypass frequency
(Hz)
UPS outlet #2 active
power (W)
Battery runtime (s) Level environment dry
contact [x] closed
Communication description Protection lost PDU input voltage
(V)
UPS power factor Battery voltage (V) Environment
temperature (°C)
Platform Automatic bypass in
tolerance
UPS output voltage (V) Environment humidity
(%)
Mac address On automatic bypass UPS output current (A) Environment
communication lost
Version On manual bypass UPS output frequency (Hz)
Manufacturer UPS master shutdown
delay (s)
PDU number outlet
UPS nominal active power
(W)
UPS outlet #1 shutdown
delay (s)
PDU outlet [x] number
UPS nominal apparent power
(VA)
UPS outlet #2 shutdown
delay (s)
PDU outlet [x] name
UPS master switchable UPS master startup
delay (s)
PDU outlet [x] switchable
UPS outlet #1 switchable UPS outlet #1 startup
delay (s)
PDU outlet [x] on
UPS outlet #2 startup
delay (s)
PDU outlet [x] voltage (V)
PDU outlet [x] shutdown
delay (s)
PDU outlet [x] current (A)
PDU outlet [x] startup
delay (s)
PDU outlet [x] apparent
power (VA)
Communication Lost PDU outlet [x] active
power (W)