User`s guide

Redundancy
102 Eaton Intelligent Power Manager (IPM) User’s Guide v1.40 P-164000289—Rev 2
Redundancy Use Cases
This section describes several typical use cases to help you properly configure the redundant shutdown
sequence according to your needs.
Use Case #1
You want to have the longest backup time with the redundant configuration. To do so, use the default IPM
configuration.
l
The IPM default configuration is available from Settings > Shutdown > Edit Shutdown Configuration
(see Figure 118).
l
For Network-MS (example, 66102/103006826) and Modbus-MS (example, 66103), the default configuration
for the Network Management Card shutdown configuration is available from UPS > Shutdown Parameters
(see Figure 119 ).
l
For ConnectUPS-X Slot or ConnectUPS-BD network cards, the Network Management Card default
shutdown configuration is available from Configuration > UPS Shutdown and Restart Settings (see
Figure 120).
Figure 118. Edit Shutdown Configuration Dialog Box
Figure 119. Network Management Card Web Interface