Datasheet

11/30/2015 167880 - HPL-ED2015 V17.0 EN 2 / 4
Max. switching duty (resistive load)  W 60
Max. switching voltage AC  V 240
Max. switching voltage DC  V 220
Maximum switching current  A 2
Min. switching capacity (reference value)   10 μA, 10 mV DC
lifespan   
Electrical (at 20 switching operations per minute) 2 A 30 VDC resistive load  Operations
>10
5
Electrical (at 20 switching operations per minute) 1 A 30 VDC resistive load  Operations
>5 x 10
5
Terminal capacity  mm² 0.25 - 1.5
Mechanical
Standard front dimension  mm 45
Device height  mm 80
Built-in width  mm 70 (4TE)
Mounting   Quick attachment with 2 latch positions for DIN-rail IEC/EN 60715
Degree of Protection   IP20 switches
IP 40 enclosed
Terminals top and bottom   Twin-purpose terminals
Terminal protection   Busbar tag shroud to BGV A3, ÖVE-EN 6
Terminal cross-section   
Solid 
mm
2
1.5 - 35
Stranded 
mm
2
2 x 16
Terminal cross-section   M5 (with cross-recessed screw as defined in EN ISO 4757-Z2, Pozidriv PZ2)
Tightening torque of fixing screws  N/m 2 - 2.4
Thickness of busbar material  mm 0.8 - 2
Admissible ambient temperature range  °C -25 - +55
Permissible storage and transport temperatures  °C -35 - +60
Climatic proofing   according to IEC/EN 61008
Mounting position   As required
Contact position indicator   red / green
Trip indication   white / blue
Design�verification�as�per�IEC/EN�61439
Technical data for design verification   
Rated operational current for specified heat dissipation I
n
A 25
Heat dissipation per pole, current-dependent P
vid
W 0
Equipment heat dissipation, current-dependent P
vid
W 4.6
Static heat dissipation, non-current-dependent P
vs
W 0
Heat dissipation capacity P
diss
W 0
Operating ambient temperature min.  °C -25
Operating ambient temperature max.  °C 55
   0
IEC/EN 61439 design verification   
10.2 Strength of materials and parts   
10.2.2 Corrosion resistance   Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures   Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat   Meets the product standard's requirements.
10.2.3.3 Verification of resistance of insulating materials to abnormal heat
and fire due to internal electric effects
  Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation   Meets the product standard's requirements.
10.2.5 Lifting   Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact   Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions   Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES   Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances   Meets the product standard's requirements.
10.5 Protection against electric shock   Does not apply, since the entire switchgear needs to be evaluated.