Datasheet

10 EATON IT Rack Accessories
Rack size (D) Quantity Part number
1000 mm 4 JCSTR1000X
1200 mm 4 JCSTR1200X
Caster wheels
• 1,000 kg static load capacity
Length Quantity Part number
200 mm 4 ETN-JANCHOR1
Anchor bracket
• Fix rack to floor to meet seismic requirements
and prevent tipping hazards
• Kit includes four anchor brackets
• Note: floor anchor hardware not included
Hardware
Cage Nuts & Screws
• Standard rack-mount hardware for
EIA-310-D 9.5 mm square hole mounting rails
Description Quantity Part number
M6 cage nut and screw kit 20 ETN-M6CAGE20
Rack PDU Mounting Bracket
• Required for mounting rack PDUs longer
than 1700 mm in a 42U rack
• Allows two vertical PDUs per side
Height Quantity Part number
0U 1 ETN-PDUBRCKTW
Description Quantity Part number
Rack Grounding Kit 1 RPGRNDX
Rack Grounding Kit
• Electrically ground rails and accessories
• 14 wires, 4 mm
2
Note: RP Series racks are provided
with grounding pre-installed
Rack Starter Kit
• M6 cage nut and screw kit, quantity 20
• M5 accessory mounting screws, quantity 20
Description Quantity Part number
Rack Starter Kit 1 RPKIT01X
Rack Baying Kit
• Fix racks together to maintain row
alignment and stability
• M8 lock nut and bolt set, quantity six
Description Quantity Part number
Rack Baying Kit 1 RPKIT02X
Note: Rack Baying Kit is included with all
racks except stand-alone versions